CDM discount Gear ROC-12S Low Profile Light Mount with Built-In Sling Swivel popular Dock online

CDM discount Gear ROC-12S Low Profile Light Mount with Built-In Sling Swivel popular Dock online

CDM discount Gear ROC-12S Low Profile Light Mount with Built-In Sling Swivel popular Dock online
CDM discount Gear ROC-12S Low Profile Light Mount with Built-In Sling Swivel popular Dock online__left


CDM GEAR

The CDM Gear ROC-12 series of light mounts is a US made railed barrel clamp that is used to support factory and aftermarket 1" diameter magazine tubes, and extensions, while providing low profile mounting rails on the left and right side for rail mountable lights and acessories.

The rail and clamp half are manufactured as one piece from aluminum and precision CNC machined to size. All threaded holes are press formed into the mount for hardness. The entire mount is then machine finished to soften round edges before we type III mil spec hard coat anodized for durability.

Fingers at the top of the clamp allow for use with a barrel rib and/or compensation ports, as well as slight barrel taper, while a solid surface on the bottom accepts our 3M no slip grip pads to reduce movement under recoil.

Just 2 socket head cap screws work opposite each other to hold the clamp in place and are included along with a wrench and our 3M no slip grip pads for the magazine tube. The mount requires 1 1/2" of mounting surface without interference from a heat shield. Will not work with heavy walled barrels or magazine tubes larger than 1".


CDM GEAR ROC-12 Light Mount

The CDM Gear ROC-12 is our base barrel clamp that is used to support factory and aftermarket 1" diameter magazine tubes, and extensions, while providing mounting rails on the left and right side for rail mountable lights and acessories.


CDM GEAR ROC-12S Light Mount

The CDM Gear ROC-12S is the same as above only it includes a limited rotation docking point for a PBQD sling swivel. (sling swivel not included)


CDM GEAR ROC-12R Light Mount

The CDM Gear ROC-12R is the same as the ROC-12 only the ROC-12R uses our patented ring and curved rail design, using a flashlight ring mount (included) to draw tight a 1" round bodied tac light into the curved portion of the rail to locate the light. This mount gives you the choice of using either a round bodied tac light or a rail mountable light/laser, or both!

CDM GEAR - Clean Lines & Intelligent Design

CDM Gear specializes in creating high-quality shotgun light mounts that are created from lightweight, durable 6061-T6 aluminum. This is a combination of aerospace aluminum and advanced structural engineering means that you get a smaller, stronger, and lighter mount.

As one of the leaders in the industry, they take pride in creating quality products that meet consumer demands.

Description

CDM GEAR ROC-12 SERIES LIGHT MOUNT

CDM Gear ROC-12 is a new basic, made in the USA, light mount/barrel.The ROC-12 series is made from new aluminum 1-piece clamp halves that have the rail formed into the clamp. The whole unit weighs 2.4oz.It is super low profile at about a 1/2"" away from the barrel with a curved, 3 slot rail that reduces hang ups and snags. It only uses 2 bolts that correlate the 2 halves to reduce incorrect mounting. The fingers at the top of the clamp make it easy to ascertain top from bottom and allow mounting to ribbed and ported barrels. It fits within a 1.25"" space on magazine tube and includes no slip grip pads and a wrench.
The ROC-12S is the same but adds a sling swivel dock built right in. These clamps fit the Remington 870 and other shotguns.
The CDM Gear ROC-12R is a base barrel clamp that is used to support factory and aftermarket 1"" diameter magazine tubes, and extensions, while providing mounting rails on the left and right side for rail mountable lights and accessories.The ROC-12R uses our patented ring and curved rail design, using a flashlight ring mount to draw tight a 1"" round bodied tactical light into the curved rail portion to locate the light. This gives you the choice of using a round tac light or a rail mountable light/laser or both!
All threaded holes are press formed into the mount for hardness. The entire mount is then machine finished to soften and round edges before we type III mil spec hard coat anodized for durability.
Just 2 socket head cap screws work opposite each other to hold the clamp in place and are included along with a wrench and 3M no slip grip pads for the magazine tube. The tac ring can be loosened to remove the tac light without disassembly of the mount.
This mount requires 1 1/2"" of mounting surface without interference from a heat shield. Will not work with heavy walled barrel or magazine tubes larger than 1"". Best on Remington 870, Mossberg 500, Winchester 1300.

Features & details

Features

  • MATERIAL - Made from aluminum 1-piece clamp halves that have the rail formed into the clamp
  • PROFILE - Super low profile at about a 1/2" away from the barrel with a curved, 3 slot rail that reduces hang ups and snags
  • EASY TO MOUNT - It only uses 2 bolts that correlate the 2 halves to reduce incorrect mounting
  • INSTALLATION- It fits within a 1.25" space on your magazine tube and includes no slip grip pads and a wrench
  • FITS - Remington 870, 1100, 1187; Benelli (except SuperNova); Mossberg 500, 590; Winchester 1300, 1200 and SXP Defender

Product information

    Additional Information

  • ASIN: B082KL4LYL
  • Customer Reviews: 4.6 out of 5 stars 117Reviews
  • Best Sellers Rank:
    #47,682 in Sports & Outdoors (See Top 100 in Sports & Outdoors)
    #68 in Hunting & Shooting Gun Stock Accessories
  • Date First Available: December 10, 2019

CDM discount Gear ROC-12S Low Profile Light Mount with Built-In Sling Swivel popular Dock online

CDM discount Gear ROC-12S Low Profile Light Mount with Built-In Sling Swivel popular Dock online

CDM discount Gear ROC-12S Low Profile Light Mount with Built-In Sling Swivel popular Dock online

CDM discount Gear ROC-12S Low Profile Light Mount with Built-In Sling Swivel popular Dock online

CDM discount Gear ROC-12S Low Profile Light Mount with Built-In Sling Swivel popular Dock online